Need Info on Lug Nuts for 14 x 6 Cast Aluminum Wheels

[jae]

I have a set of the cast aluminum 14X6 wheels (option code N78 or N76?) that came on the '78 - '81 Cutlass, more so the '79 & '80 W-30 cars, and am in need of lug nuts.

Does anyone know the type of lugs these wheels need? From what I remember on the first set I had on the '81 Calais they weren't the regular lugs that came on the SSII / III wheels; they had a chamfered head on them then a long shank.

Any help would be more appreciated.

 

[GP403]

Probably the same as the other early aluminum wheels... check this post:

http://gbodyforum.com/viewtopic.php?p=6 ... ght=#65216

 

[jae]

Probably the same as the other early aluminum wheels... check this post:

http://gbodyforum.com/viewtopic.php?p=6 ... ght=#65216

Thanks, I think I found the ones I need from the reply by DrRansom442 referencing the Ecklers for a Corvette. From what I remember these are the ones. Guess I didn't look hard enough through the forums.

 

[srercrcr]

The lugs for the early aluminum rims and the Grand Prix wire wheels did lay flat against the rim, no taper. The GM # is 371674. Keep trying ebay with that number. They show up occasionally. The repros don't have as good chrome IMO, but that's not unusual.

 

[jae]

The lugs for the early aluminum rims and the Grand Prix wire wheels did lay flat against the rim, no taper. The GM # is 371674. Keep trying ebay with that number. They show up occasionally. The repros don't have as good chrome IMO, but that's not unusual.

Thanks, will look that up. 😀