NEED INFO ON PS PULLEY!!!

[soloone87]

so with my swap in the car the ps pump pulley is to large and is rubbing on my steering box... i need to find a smaller pulley for the ps the only one i found is a holley but im not sure if the shaft diameter is a 5/8th or not so anyone have that info off hand?


the only one i found http://www.speedwaymotors.com/PULLEY-SMALL-P-S-PUMP,233941.html

 

[GBodyscuffle]

http://www.dirtydingo.com/shop/product_info.php?cPath=373_376&products_id=1389

Try this one. I used it in my 87 cutlass. Truck accesories, custom engine mounts.

 

[84_SS]

Dirty Dingo makes some nice stuff, especially for the money. I have all their accessory mounts, great customer service too.

 

[soloone87]

nice thanks guys this should work i hope much appreciated

 

[81msw79]

so with my swap in the car the ps pump pulley is to large and is rubbing on my steering box... i need to find a smaller pulley for the ps the only one i found is a holley but im not sure if the shaft diameter is a 5/8th or not so anyone have that info off hand?


the only one i found http://www.speedwaymotors.com/PULLEY-SMALL-P-S-PUMP,233941.html

IT SAYS IT PROVIDES 5/8" MORE CLEARANCE. NOTHING ABOUT SHAFT DIAMETER

 

[soloone87]

IT SAYS IT PROVIDES 5/8" MORE CLEARANCE. NOTHING ABOUT SHAFT DIAMETER

yeah i realized that after i re read it lol i wonder if they are all the same shaft diameter

 

[soloone87]

so i got this ps pulley and it was working fairly decent..... until the ps pump locked up and the pulley came to a complete stop while reving around 4400rpm and all thats left of the pulley is the metal piece in the center thats stuck on the shaft.... i need to reorder the part but dirty dingo stopped carrying it anyone know what pulley this was?

 

[84_SS]

I'm pretty sure it's what ever accessories you are using, so if you're using truck accessories you would get a truck pulley. But I would say give dirty dingo a call and explain the situation they can probably point you in the right direction.