never really introduced my project

[85cutlass]

before
http://gbodyforum.com/photos/displayimage-219-0.html

http://gbodyforum.com/photos/displayimage-219-1.html


mocking motor up:
http://gbodyforum.com/photos/displayimage-219-1.html

side view crappy v6 still in car:
http://gbodyforum.com/photos/displayimage-219-3.html

interior shot:
http://gbodyforum.com/photos/displayimage-219-4.html

gauges:
http://gbodyforum.com/photos/displayimage-219-5.html

rims:
http://gbodyforum.com/photos/displayimage-219-6.html

new 4 speed:
http://gbodyforum.com/photos/displayimage-219-9.html

rim again:
http://gbodyforum.com/photos/displayimage-219-10.html

 

[Coveted]

bad request, pictures dont work.

 

[85cutlass]

it should work now

 

[85cutlass]

yeaaaa

 

[78mali350]

looks like a pretty cool project you have there

 

[Vern]

4 speed stick will get some cool points! I'd use the crappy little 14x6 chevy wheels for tradeing foder. They look decent they just won't look right on that car and skinney little 14s just plain suck for a performance application. Either some 15x7 Olds ralleys or something bigger. If you go to a non Olds wheel I would consider going to 17s as they look great with the body lines and you have lots of good tire and brake choices. Are you planning on doing anything interesting or cool as far as an engine / setup for her? We will need to see some interior pics when you got that big ole gear grabber sticking up out the floor.

 

[85cutlass]

yea ill post them up when i get it in i jus put the front suspansion back together

 

[85cutlass]

just got used tires on my crappy 14inch wheels so i can get the car on the floor again, i just gotta put the new brake calipers on then the wheels, i want to see how it sits with the new springs, its coming along, very slowly, next is i gotta find a whole clutch setup because im an *ss and screwed on on the ebay account, put a whole in the floor for the shifter, put the rug back in, seat, and steering wheel. Then i can pull the motor and trans, switch the fuel lines to the other side and start building my other motor and throw it in.

 

[85cutlass]

Just baught new parts for my motor. I got a chevy 350 block with stock forged crank, 4 bolt main, stock rods and pistons. i Bought chevy double hump cylinder heads( would like opinion on these heads) they got 2.02 intake and 1.60 exhaust, new arp bolts, edelbrock performance rpm air gap intake with new bolts, comp cam roller rockers 1.5 ratio, cam and lifter kit crane cam .454 intake lift and .454 exhaust lift, with double roller timng chain and pushrods. All parts from summitracing. Is this a good setup. I am using it as a daily driver when i get done with the car but i also want some power. What do you guys think this setup. would appreciate opinion. Thanks in advance

P.S ill post picks when the parts get to my house, they jus shipped 2day.

 

[83cut350chev]

that seems to be a nice setup should be plenty of power there for ya ..