New member! Florida COIL SPRINGS 82 REGAL???
- Thread starter cbman455
- Start date
- Status
This is a wicked old thread but I already have the S10 springs on my bu now. I was pissed because they actually put my car back to stock height. The car, at the rocker panels, was perfectly level with the ground, which made it look funky with the g-body lines. Ended up cutting a full coil out to get the drop I wanted with the stock spindles. With 2 inch drop spindles you should have to take a coil out like I did, since after taking a coil out, it dropped my front 2 inches with a sbc 350. Here are some before and after pics:
Here's what I have going for plans right now. I have:
-2" drop spindles and Belltech drop shocks to install (front)
-A poncho 455 going in soon, car already has a sbc and matching front springs
-Found a set of 5664 springs for $47 shipped!
-Found a 36MM sway bar for $50 or best
-Found a IROC steering box for $50
-1" UMI rear sway bar,
- UMI tubular trailing arms
-1 1/2" rear drop springs & shocks
Opinions or comments on that set-up? This is strictly a street car.
-2" drop spindles and Belltech drop shocks to install (front)
-A poncho 455 going in soon, car already has a sbc and matching front springs
-Found a set of 5664 springs for $47 shipped!
-Found a 36MM sway bar for $50 or best
-Found a IROC steering box for $50
-1" UMI rear sway bar,
- UMI tubular trailing arms
-1 1/2" rear drop springs & shocks
Opinions or comments on that set-up? This is strictly a street car.
- Status
Similar threads
