New Wheels and Tires

[jonnyv713]

I am wanting a better look for my Cutlass now guys. I used the search thing, but I couldn't find anything that answers my question. Basically, will this stuff fit? Not only fit, but look and perform well. I want my wheel wells full and nothing to rub.

Front wheels and tires
http://www.jegs.com/i/American-Racing/2 ... 1/10002/-1
and
http://www.summitracing.com/parts/RIK-14071/

Rear wheels and tires
http://www.jegs.com/i/American-Racing/2 ... 1/10002/-1
and
http://www.summitracing.com/parts/RIK-18609/

I will be using a .5" spacer in the rear also because I cannot find them with only 4" backspacing. Will I need longer rear studs?

I'm open to suggestions. Thanks guys!

 

[khan0165]

I think you have picked an excellent combination,

- Yes, a 0.5" spacer in the rear may be necessary. But I would recommend you try it out first... you may get away with a smaller spacer, or no spacer at all. I have heard of some people using 4.5" BS without issues.

- Yes, you will need extended studs. These "Pro-Star" type wheels have a very thick mounting area, and that coupled with spacers will definately require long studs.

- One thing to look out for is a conical seat for the lug nuts. I believe older ProStar wheels used to have a flat seat for their lugs. I'm not sure about newer ones... If you are using long studs, I HIGHLY recommend using wheels with conical seat holes.

- just wondering... can you use 215 tires on the front 7" wide wheels? I think 255 will be perfect to the rear 8" wide.

Hope that helps/...

 

[85GPLef41]

Hey! i was looking at those wheels... :lol: Look forward to seeing what it takes to mount these wheels as well I may end up getting the 18in though. Does anybody have these wheels mounted on their ride?

 

[83cutlassowner]

sure dont but 18's are what i want in that style also. damn we have good taste lol

 

[khan0165]

sure dont but 18's are what i want in that style also. damn we have good taste lol

ha ha...
... so modest