I have an 85 Grand Prix that I am rebuilding, i've got some used cargo coil springs for the rear but i'm not sure what to put up front. It is a factory v6 car but I will be putting an sbc in soon. What springs should I use up front? I do not want the car lower than stock, but i also don't want it to look like an off road vehicle. Any ideas? Part numbers? thanks!
New, with spring question
- Thread starter 85_GrandPrix
- Start date
- Status
BTW, the car will have A/C, if that makes a difference.
Anyone?, I'm ready to order the springs, I just don't want to get some that will lower the front end, or raise it a rediculous amount.
Anyone?, I'm ready to order the springs, I just don't want to get some that will lower the front end, or raise it a rediculous amount.
you can get the moog numbers from here or at the part store since you're looking for the stock springs
http://jeffd.50megs.com/Moog_Spring_Page.htm
http://jeffd.50megs.com/Moog_Spring_Page.htm
Here is a pretty good discussion of springs for G-bodies. HTH
http://www.maliburacing.com/coilspring.htm
http://www.maliburacing.com/coilspring.htm
Factory front springs for a V8 or front springs for the factory suspension option, F41 I beleive and then 2" dropped spindle but keep the front rims standard 15 x 6 or the tires will rub on the inner fender, if you get to wide in front. This is for after you install the V8 with A/C.
- Status
Similar threads
