not a 4160 carb??

[beermonkey9417]

i have the carb off my elky and i was gonna rebuild it but the book i bought doesnt seem to have the same carb i got. its a holley carb and i have the holley rebuild book but i cant seem to figure it out. heres some pics.

thanx for your help.

 

[gpguy]

looks to be a older 600 manual choke...should be some #s on the choke horn can google holley specs page

 

[beermonkey9417]

what i was told was its a 650 cfm carb. but that guy also said the engine was a 350, not a 307.

 

[1evilregal]

looks to be a older 600 manual choke...should be some #s on the choke horn can google holley specs page

+1 on the #'s on the air horn in front of the choke plate... looks like it could be a manual choke 4150 double pumper looking @ the metering block behind the rear float bowl....my 4160 single pumper doesnt have that, but a restricor/metering plate inside the float bowl... being a double pumper, it still could be a 650 cfm.... hth

if you post up the #'s, my book has a breakdown of the models and cfm's

Darin

 

[beermonkey9417]

where is that place you speak of? got a pic?

 

[1evilregal]

will try to get a pic of mine today

 

[beermonkey9417]

is this the stamp yer lookin for?

 

[DRIVEN]

There it is - 1850. 600cfm manual choke. Looks like it had a secondary metering block conversion.

 

[beermonkey9417]

so that makes it what kinda carb? because i already have the 4160 rebuild kit, im assuming its not the right one? so on teh holley site it has 1850c and 1850s, mine says 1850-2...

 

[beermonkey9417]

well after lookin for a while i found this:
http://www.holley.com/data/TechService/ ... isting.pdf
so my car IS a 4160. well that helps. and now you can look up Your carbs!