Outer window sweeps

[Baker7888]

Hey guys, How do I access these? I have the door panel off, the glass covers some of the screws. I also have new door hinges, any tips?

 

[old80cs]

Lower on the interior door, with the door panel off, there is a bolt with a bracket inside the door that limits how far the window will drop. Loosen it and lower the window just enough to access the screws to the sweeps.

 

[ELCAM]

Number 11 for the bottom stop. Mark it before loosening it so you can get it back to proper alignment without fighting it.

 

[Baker7888]

Number 11 for the bottom stop. Mark it before loosening it so you can get it back to proper alignment without fighting it.
View attachment 249121

Thanks guys. I will have a look tonight. Great pic ELCAM. I found this video for glass adjustment. I circled one of the bolts in RED. On my car, there is no slot at this location, just a bolt. ???

 

[ELCAM]

Pretty sure the difference is a 1978 thing, they weren't quite done perfecting the design yet.

 

[Baker7888]

Pretty sure the difference is a 1978 thing, they weren't quite done perfecting the design yet.

Okay sounds good. I did reach in there and it is attached to the bracket.

 

[Baker7888]

So Ive got the window adjusted. Had to start with door hinge adjustment. My new outer sweep is on. In order for the widow to make contact with the sweep i have the top felt guides pushing against the window. However when i roll the window down it’s LOUD. The noise is from the guides. If i back it off the noise quiets down however the window no longer makes contact with the outer sweep. Does this sound right? Is the guide just worn out?