Please help me out a lil bit

[chriscutlass]

Hi all i have an 87 cutlass supreme 2 door, due to the previous owners misuse and abuse on this car im missing small but very important peices
if you happen to be junking a cutlass i need these small pices and will send you money for them

FRONT EURO HEADER PANAL DECAL
REAR BUMPER COVER NUTS that hold it to the back up light bar and under the tail lamps
TAN SEAT BELT COVERS
CLIPS THAT HOLD DOWN THE CROME TRIM TO FRONT FENDERS (i have the crome pieces just them clips broke on both sides while i was puttin it back together

if you have these parts or pieces please pm me for my address and a price for them pieces

THANKS -CHRISCUTLASS

 

[Schober Motorsports]

Most of those sound like little misc pieces, have you tried the junkyard?

 

[chriscutlass]

Most of those sound like little misc pieces, have you tried the junkyard?

yea but in jersey its very hard to find G's at any junk yard around hear i mean youll find a monte or elky here and there but put it this way i had a local cop run cutlass's in my town, im the only guy in central nj with a metallic blue landeau roofed cutlass from 1987 in this area, closest jyard to me is 45 min 🙁 and ive searched about 8 of them around here

 

[FE3X CLONE]

FRONT EURO HEADER PANAL DECAL

Is this the piece the rocket symbol that goes between the grilles? If so, they can be very hard to find and NOS versions go for $75-$150 typically. When they were available from GM they only cost $12-$13.

REAR BUMPER COVER NUTS that hold it to the back up light bar and under the tail lamps

These can be had at just about any parts store. They're called "Pal" nuts. Should look something like this:

TAN SEAT BELT COVERS

If no one has Tan covers and you run across a different color, you can always use spray dye to get them to match. That way you don't have to limit yourself to just Tan parts.

CLIPS THAT HOLD DOWN THE CROME TRIM TO FRONT FENDERS (i have the crome pieces just them clips broke on both sides while i was puttin it back together

I'm sure any body shop could get these.

 

[DrRansom442]

the clips that hold the flat Chrome trim to the front fenders .... beleive dealers still have them and they aint all that pricey. You can also try with stores that cater to body shops. In town we have a business that deals in nothing but specialty auto-fastners. This is where I bought mine and they came in GM bags. IDK if they were in the trunk of my car when it was stolen if if I have them still. I'll remember you if I stumble acrossed them.

 

[88hurstolds]

Clips are still available from GM and they're cheap, you can just order them from gmpartsdirect.com or your local dealer.

PN 22510423 for LH and 12338009 for RH, two of each is required.

The bad is that the RH comes in packages of 5 even though you need two, the LH comes in packages of one.
GMPD is $31.29 all said and done with 3 extra RH's which you can save or sell...
Try your local dealer... or search for trim clip catalogs online (Google is your friend) they have just about any clip you can think of for next to nothing...

I wouldn't suggest installing used clips otherwise you're prone to lose the trim again, they get brittle over time and lose their integrity.