Power window went down fine, won't go up?

Status
Not open for further replies.
Nov 4, 2012
6,127
13,317
113
12
My drivers side window went down just fine, a little slow, but nothing rediculous. Now it won't go up. I don't think it slipped off of the guides because I didn't hear the window fall, and the window doesn't even make an attempt to go back up. Switch, fuse, wires? The passenger side works just fine, just not the drivers.
 
If you don't here the motor trying to bring the window back up when you hit the switch then the first thing I would check is the contacts on the drivers side window switch they can become corroded and usually just need a little clean up to work again.
 
open the driver's door and move the harness that passes from the door to the door frame while you trying to put the window up. Here's the wiring diagram for the power windows

PowerWindows.jpg
 
565bbchevy said:
If you don't here the motor trying to bring the window back up when you hit the switch then the first thing I would check is the contacts on the drivers side window switch they can become corroded and usually just need a little clean up to work again.

I cleaned off the contacts, and nothing. Should I try replacing the switch?
 
I'd be checking it with a test light to see where you have power and where you don't using the diagram above
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor