MALIBU Rear seat fitment after mini tubs
- Thread starter shoedoos
- Start date
- Status
Pics aren't in any order but you'll figure it out. And even though I only added that tiny strip into the tubs, I still think it was worth it.
That's a 275/60 in there and the body sits down over the tire nicely without rubbing.
The tricky bit is cutting through the floor section inboard from the tubs. There's a double (maybe triple) skin in areas which requires a large disc or sawzall to cut through it.....
Hinge mounts and seat hooks need special attention so they work as per OEM after the tubbing is done.
This was all done in an afternoon/evening.
That's a 275/60 in there and the body sits down over the tire nicely without rubbing.
The tricky bit is cutting through the floor section inboard from the tubs. There's a double (maybe triple) skin in areas which requires a large disc or sawzall to cut through it.....
Hinge mounts and seat hooks need special attention so they work as per OEM after the tubbing is done.
This was all done in an afternoon/evening.
Aha.......found it right here on gbodyforum
https://gbodyforum.com/threads/rear-seat-mod-for-mini-tubs-w-pictures.26470/
https://gbodyforum.com/threads/rear-seat-mod-for-mini-tubs-w-pictures.26470/
- Status
Similar threads
