i need to finish the bottom end on my 350 before i can start sealing it up to finally run her this year and i'm mentally stuck. i'm using the stock 79 mali oil pan and already have new gm stock crank bolts with standoffs. what i'm stuck on is which windage tray to use like the teflon coated one moroso makes or the stock one that come on factory vortec truck engines or these highly talked about windage screens. i heard alot of dyno claims about the milodon diamond stripper but ignore it for the $100 price tag. the other baffles are about $20 some and just found the canton sbc windage tray screen wich looks like the same as the $100 milodon tray but for only $50 online. for a street/strip 350 under 7k rpm's which is necesarry or will suit me fine.
oh, i'll add that since i live in the country where 95% of my miles are highway that this car wont be pushed except for a couple times a year at street days and occasional weekend cruising through lights.
oh, i'll add that since i live in the country where 95% of my miles are highway that this car wont be pushed except for a couple times a year at street days and occasional weekend cruising through lights.
