Equally put weight to both rear with this http://www.d-mproducts.com/antirollbars.htm best bang for the buck on any rear upgrade even boxed arms IMO.
TRACTION NEEDED
- Thread starter nawlins-tim
- Start date
- Status
Interesting H&R parts used to use the same photos and claim it was there parts that made the before and after than is now shown on the dmproducts site. I have bought stuff from Paul in the past and had good results with it. Quality but pricey. 11.8s at 116mph is kicking butt and doing it in an Elco body isn't easy especially fighting traction from the torque of that big Buick motor. Would have to be one hell of a fun ride though.
mine normally lets the right side spin but sometimes it will let them both sing lol im not sure but i was thinking about swapping rear ends to a posi
I do not want to highjack nawlins-tim forum, but what should I do about the rear just moving? When ever I launch the rear just takes off. Do I need bigger tires or just more weight or maybe what you all are telling nawlins-tim to do?
This is cut and paste from above...
first get some track tires
second box both uppers and lowers, steel is pennies if you have a scrap yard around and if you have a buddy with a welder your cost is almost nothing.
third is a sway bar
forth is fixing your IC.
This is of course you've already trashed that 7.5" 10 bolt for an 8.5" 10 bolt or a 12 bolt
first get some track tires
second box both uppers and lowers, steel is pennies if you have a scrap yard around and if you have a buddy with a welder your cost is almost nothing.
third is a sway bar
forth is fixing your IC.
This is of course you've already trashed that 7.5" 10 bolt for an 8.5" 10 bolt or a 12 bolt
- Status
Similar threads
