Wagon interior rear 1/4 panel question

[BlairC_789]

Here’s some pictures off my mounting. 4 screws on the door hinge, 2 screws holding the bracket and the black dot is infact a rubber pad on both top corners.

I would be interested in the passenger side door some mine is missing but I know my offer wouldn’t be accepted 🤣

 

[Longroof79]

View attachment 204640View attachment 204641
Here’s some pictures off my mounting. 4 screws on the door hinge, 2 screws holding the bracket and the black dot is infact a rubber pad on both top corners.

I would be interested in the passenger side door some mine is missing but I know my offer wouldn’t be accepted 🤣

Thanks for posting the pics. Besides the doors, I'd still need the latches,

 

[BlairC_789]

Thanks for posting the pics. Besides the doors, I'd still need the latches,

the metal latches may be something that can be made by hand bending some 1/8th stainless rod or with a cheap harbor freight tube bender

 

[Longroof79]

the metal latches may be something that can be made by hand bending some 1/8th stainless rod or with a cheap harbor freight tube bender

That's funny, I thought the same thing. It's a simple design. Thank you for the suggestion. If I can't find 'em, I'll make 'em.

 

[PBGBodyFan]

Jack the last ones I had where held on with a clip and screw deal...




View attachment 204462

I forgot about those, but yes the ones I have seen have these clips as well.

 

[BlairC_789]

That's funny, I thought the same thing. It's a simple design. Thank you for the suggestion. If I can't find 'em, I'll make 'em.

If you eventually get some doors and try to make some let me know and I can take more pictures and measurements

 

[Longroof79]

If you eventually get some doors and try to make some let me know and I can take more pictures and measurements

Thank you Blair, I appreciate that sir. The measurements would certainly come in handy and take some of the guesswork out of it.
How's progress coming along on the wagon?

 

[BlairC_789]

Thank you Blair, I appreciate that sir. The measurements would certainly come in handy and take some of the guesswork out of it.
How's progress coming along on the wagon?

Havnt had much time to do any work as of recent other than new headlights, tuning carb some. Hopefully I’ll be able to kick into high gear soon

 

[Longroof79]

Havnt had much time to do any work as of recent other than new headlights, tuning carb some. Hopefully I’ll be able to kick into high gear soon

You've made a lot of strides on the wagon in a short time. I commend you on that. 👍