403Olds

Latest activity Postings About

• • 4

    403Olds replied to the thread Fuel Filter Change.

    I like to put the filter between the frame hardline and the fuel pump. Keeps any risk of leaks down low off the engine. I had a friend...

    Thursday at 8:59 PM
  • 4

    403Olds reacted to 69hurstolds's post in the thread Fuel Filter Change with Like.

    The metal one would be better. But construction is important. Personally, I'd go with metal line from the pump to the carb, and if you...

    Thursday at 8:56 PM
  • 4

    403Olds reacted to bob64's post in the thread Most Common G-Body Problems with Like.

    Rear Frame rails rusting out, fix, replace.

    Thursday at 4:24 PM
  • 4

    403Olds reacted to Ribbedroof's post in the thread The cost-benefit to owning cars?? with Like.

    If you're driving old cars for other people's admiration, you're into it for the wrong reasons. I drive them because I LOVE them, and...

    Tuesday at 9:10 PM
  • 4

    403Olds reacted to john87442's post in the thread Hellwig FX Frame Kit installation experience? with Like.

    Here is a picture

    Monday at 4:27 AM
  • 4

    403Olds reacted to spongbob's post in the thread Side to side steering slop with Like.

    That's a good question aside from the rag joint area .Take your hand and with car running and in park open hood and turn the steering...

    Monday at 4:26 AM
  • 4

    403Olds reacted to john87442's post in the thread Hellwig FX Frame Kit installation experience? with Like.

    Oh yeah as to the not a great welder…. As I was told as long as you have good penetration the welds will look great after you grind...

    Sunday at 6:26 AM
  • 4

    403Olds reacted to Ugly1's post in the thread Hellwig FX Frame Kit installation experience? with Like.

    I’ve never done that type of extensive frame work. Your talking hotrod or drag racing even true oval track frame braces for a jig setup...

    Apr 20, 2024
  • 4

    403Olds reacted to melloelky's post in the thread Hellwig FX Frame Kit installation experience? with Like.

    this's a pretty grass roots forum, i don't think you're gonna find more than a handful of people on here that have experience with...

    Apr 20, 2024
  • 4

    403Olds replied to the thread Hellwig FX Frame Kit installation experience?.

    I've not installed the kit, but have put new body bushings in, and had to weld in large washers to repair the mounting holes in the...

    Apr 20, 2024
  • 4

    403Olds reacted to Clone TIE Pilot's post in the thread hows your thermostate with Like.

    Generally it's best to stay with the stock 195 Tstant, 160 is way too cold.

    Apr 13, 2024
  • 4

    403Olds reacted to bracketchev1221's post in the thread Biggest Rear Tires Stock 85 Monte Carlo SS with Like.

    Depends on what you want to call fitting. Jack the car up high enough and anything will bolt on. If you want it tucked inside the...

    Apr 13, 2024
  • 4

    403Olds reacted to WanaBa442's post in the thread Driveshaft lengthening sanity check with Like.

    Didn't see it mentioned but if you're staying with stock suspension and rear axle I'd source a shaft from one of the million or so G...

    Apr 10, 2024
  • 4

    403Olds replied to the thread Front suspention question.

    I've not seen any down sides to the tall ball joints. They are mainly for better handling, but shouldn't hurt on the strip. I...

    Apr 7, 2024
  • 4

    403Olds reacted to oldsofb's post in the thread aluminum rad. flush with Like.

    I copied this from a previous post I made on the same subject. Here's how I've always flushed mine: Drain existing coolant and leave...

    Apr 7, 2024

  Show older items
• Loading…
• Loading…