My driveshaft had the original u joints held in with the nylon that needed heating up to come apart. After doing that and seperating everything i set it to the side and didnt mark which end the yoke came off of.
So now its days later a i have no clue which end to put the yoke on. New u joints with inside clips but not together yet. Does it matter for balancing purposes. I thought the end with the weight on the tube went to the axle but not sure
So now its days later a i have no clue which end to put the yoke on. New u joints with inside clips but not together yet. Does it matter for balancing purposes. I thought the end with the weight on the tube went to the axle but not sure