I was just thinking (which is dangerous), if the carrier is an Auburn posi side gears were never available since the Auburn was not rebuildable
Carrier Question
- Thread starter fleming442
- Start date
- Status
https://www.summitracing.com/int/parts/yga-16048/overview/
I used the Yukon above, much harder than the stock spider gears
I used the Yukon above, much harder than the stock spider gears
That's plenty IMO. Head to the boneyard and look for a 4 cyl S10 - the gears will look like new due to the lack of power/torque as long as it's never been run out of oil. The bearings will match.
Hmmm, I think that's exactly what I'm getting. Did 4 bangers get 4.11s? I might just leave them.
I think some of the 4cyl S-10 got 3.73 gears as well. Most of the Astro Van's are the 3.23 gears you seek, my local wrecker had to look at quite a few to find the 3.42 gears I wanted when my spider gears exploded and took out the pinion gear. The normal spider gears can be used IF there is no signs of wear or excessive play. Not sure how much rubber the 3800 will lay, that is what kills them, shock load.
Yeah, I don't plan on racing it. However, a gratuitous burnout here or there might not be out of the realm of possibilities....
When I purchased my still-un-used 3.73 gears from Summit they were listed as being for a 2 series carrier.
*cough* I'm selling them if anyone's interested. *cough*
*cough* I'm selling them if anyone's interested. *cough*
- Status
Similar threads
