Latest activity Postings About
-
-
Received the full order, checked them out and they seem really good when holding them next to the car's body. These are made of rigid... -
565bbchevy reacted to justdandy's post in the thread Does anyone here regret their auto to manual swap? with
Like.
Well I see the "stick" guys rule, BUT I have a 2004R in my Nova, with an old 350 motor, works great. I have a 700R4 in my '84 Elky... -
Do you know which part number duralast you went with? Never mind I saw you stated DL1016B
-
565bbchevy reacted to MrSony's post in the thread FOR SALE 1985 regal limited for sale $12500 obo with Like.
Nice car, don't turn down any offers north of 7500, and consider offers north of 5000. It's just a regal, you're asking turbo car money...
-
565bbchevy replied to the thread hood struts for grand national.After buying some cheapie replacements from Amazon years ago that seemed to just barely keep the hood up until they failed, I ended up...
-
565bbchevy reacted to 81cutlass's post in the thread Does anyone here regret their auto to manual swap? with Like.
I put a t56 out of an F body behind my LS in my GP and have about 20,000 miles on the setup. The swap was a bit of a pain, mostly with...
-
565bbchevy reacted to bracketchev1221's post in the thread Does anyone here regret their auto to manual swap? with Like.
I'm of the old crowd. I had one until my leg didn't like it anymore. I am past the stick idea. I had my fun, went low 10's with a...
-
565bbchevy reacted to Ernest's post in the thread Does anyone here regret their auto to manual swap? with Like.
The only regret you'll soon find is having a stick in stop and go traffic.... and when getting much older, your left knee will most...
-
565bbchevy replied to the thread Bad Vibration Under Acceleration At Any Speed.IMO you have already spent the money to buy your built 350 trans and everything needed to set it up. I agree with 78Delta88 to just put...
-
565bbchevy reacted to doood's post in the thread Bad Vibration Under Acceleration At Any Speed with Like.
Beautiful car. I am baffled why the driveshaft came apart before the 7.5" rear end. You mention 31-spline axels, and using a carrier...
-
565bbchevy reacted to jcelk's post in the thread Bad Vibration Under Acceleration At Any Speed with Like.
with the 373 gears overdrive is the way i would go
-
565bbchevy reacted to 78Delta88's post in the thread Bad Vibration Under Acceleration At Any Speed with Like.
Also you can just cut off the bell and install a uni-bell.
-
565bbchevy replied to the thread air filter.I bought an Ebay 14" air cleaner for my Regal and the original cheap element was 14 inches O.D. and fit snug but the rubber seals...
-
no I have never use this company , buy thank you for posting the link. they have great selection for cars I never would thought would...
-
Hey just wanted to give a shout out to Mike at Mikes Montes. I have gotten some other things from him, but was looking at needing a...
-
565bbchevy replied to the thread T Roof vs hard top cars.I've had a few T-top Gbody's when I was younger and I thought they were cool back then and I still do but now all of my vehicles have...
-
565bbchevy replied to the thread 245 60 15.On my Monte I ran 15x8's with 4 in backspacing all around and had 245 60's on the front and 275 60's on the back with no issues.
-
-
565bbchevy replied to the thread Driveshaft measurement.https://gbodyforum.com/threads/driveshaft-lengthening-sanity-check.89013/post-956150
-
Some guys are Pro smog/CCC equipment and some are not. I’m guessing they may also follow all the other vehicle rules as well. Dressed...
-
565bbchevy replied to the thread routing brake line.If it were me I would run a new line from the combo valve to the rear flex hose and if you use Cunifer or Nicopp tubing it is easy to...
-
-
Loading…
-
Loading…
