olds307 and 403
Geezer From Melville,Saskatchewan
- Joined
- Last seen
- Viewing thread 1970 Olds Cutlass S Rat Rod Style
Latest activity Postings Media Albums About
-
-
olds307 and 403 replied to the thread 1970 Olds Cutlass S Rat Rod Style.So these arrived, Peyton's covers are super nice but triple the cost. These look really nice along with the welds, I like the short... -
olds307 and 403 reacted to bracketchev1221's post in the thread 1970 Olds Cutlass S Rat Rod Style with
Like.
I would never put another one of those flexplates in my car regardless of who thinks they are good. I ran a 1000 hp drag car with a... -
olds307 and 403 replied to the thread Grandpa Car: 1979 Cutlass Thread.You know the R4 brackets need to be extended as they were never an option on the tall deck Olds. Just a FYI on the needed fabrication...
-
Added to the parts pile.
-
olds307 and 403 replied to the thread 1970 Olds Cutlass S Rat Rod Style.I ordered a set of the aluminum welded valve covers with breather holes. They should provide slightly more clearance than stock. I like...
-
What’s not surprising Mike? The fact that a resolution was found, the fact that I got back on it before I said I would, or that I will...
-
olds307 and 403 replied to the thread BUILD THREAD “The Juggernaut”.Super, sometimes even a magician like yourself needs help. Glad your friend could help.
-
CCC or regular Quadrajets have pretty much the same choke operation, so whether it's CCC or not doesn't make any difference, really.
-
olds307 and 403 replied to the thread 1970 Olds Cutlass S Rat Rod Style.😉 Yeah, the flexplate is toast, broken all around the bolts. Mark is supposed to send me one next week. Edit Quote
-
It's been my expeiriance as to doubt the validity of additives claiming to restore engines. if your motor has worn out bearings pumps...
-
olds307 and 403 reacted to jasonhudsonCIA's post in the thread BUILD THREAD 78 Malibu 350 rocket build kind of with Like.
Finally got it to fire over today. Had 2 plug wires backwards. Now I just need to throw the rest of it back together. What would cause...
-
-
olds307 and 403 reacted to jasonhudsonCIA's post in the thread BUILD THREAD 78 Malibu 350 rocket build kind of with Like.
No dice on the car. It was just cranking too slow to get anything going. I'll have to drain that vr1 out and go get some lucas hot rod...
-
olds307 and 403 reacted to 69hurstolds's post in the thread OLDS Looking For G-body Olds V8 Water Pump Bolts Info? C'mon In. with Like.
For those Oldsmobile V8 guys trying to find that ELUSIVE nugget of bolt/stud 5/16-18 x 2-5/8" bolt with a 0.65" stud (21/32") on top...
-
olds307 and 403 replied to the thread Valvoline Restore and Protect.My understanding is, it meets or exceeds all the current standards. No seal swelling agents and regular ZDDP levels. The wear tests are...
-
olds307 and 403 replied to the thread 1970 Olds Cutlass S Rat Rod Style.Ok, so I was going to buy the US made ATI flexplate. Despite being supposedly checked for balance, obviously not very well. Cutlassefi...
-
olds307 and 403 replied to the thread Pontiac 400 in el camino.Or why not a LS? Because some of us are not sheeple😘
-
If ya know- ya know. :mrgreen:
-
olds307 and 403 replied to the thread BUILD THREAD 78 Malibu 350 rocket build kind of.I ground down the EGR cover on the Performer to run a Thermoquad. You now see why Edelbrock says that carb doesn't fit with the EGR...
-
olds307 and 403 replied to the thread 300hp 307.There has been 450HP out the 307, Dale Robinson did it. It means moving ports around in the head, high compression, better ring packs...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
