My age is going to show. Back when 55-57 Chevies were more common at the dragstrip, one of the old suspension tricks was to grind the "teeth" from the inboard side of all four a-frame bushings, to allow quicker front end rise on the starting line.
I am going to rebuild the front end of my (Drag only) 80 Malibu with new Comp. Eng. 3-ways and Moroso coil springs. It would seem to be a good time to do ball joints etc.
The A-frame bushings appear to be original but having not disassembled them yet, I don't know if the above exercise is even possible or beneficial.
If this setup does not permit the above, what are you drag-only guys putting in your stock A-frames?
Thanks for your time.
I am going to rebuild the front end of my (Drag only) 80 Malibu with new Comp. Eng. 3-ways and Moroso coil springs. It would seem to be a good time to do ball joints etc.
The A-frame bushings appear to be original but having not disassembled them yet, I don't know if the above exercise is even possible or beneficial.
If this setup does not permit the above, what are you drag-only guys putting in your stock A-frames?
Thanks for your time.