THE CIRCLED AREA ON THIS ATTACHED BLOCK ON THE FUSE BLOCK CONTAINS A HOBBS PN 1253637 BUZZER FOR THE SEAT BELT(THE 4 PRONG CONNECTER), I REMOVED THIS YEARS AGO, WHAT ARE THE OTHER SILVER PLUG WITH BLACK SQUARE AND THE WHITE SQUARE RELAY? IF THESES ARENT NEEDED THEN I WAS GOING TO REMOVE THE BLOCK BUT THEN WOULD HAVE TO DEAL WITH CUTTING THE WIRES,ETC. AND I DONT WANT TO DO THIS, BUT IF THOSE 2 PLUGS ARENT NEEDED CAN I REMOVE THEM AND CAN THE BLOCK BE REPUROSED FOR SOMETHING?
TO THE RIGHT OF THE FLASHER RELAY IS A PINK AND A RED WIRE,BOTH COMING FROM THE "batt" TAP. THESE ARE GOING TO MY CADDY POWER SEATS WITH A 30 AMP FUSE ON EACH(HOOKED UP TEMPORAILY). I NOW HAVE 2- 30 AMP RELAYS WITH A 10 GUAGE WIRE THAT I WANT TO HOOK UP TO THE "BATT" TAP BUT CANT FIND A PICO TAP W/ 10 GUAGE WIRE...ANY SOURCES FOR THIS? THOSE SPADE CONECTORS DONT HOLD UP WELL..KEEPS SLIDEING OUT
TO THE LEFT OF THE FLASHER IS A 12 GUAGE RED WIRE GOING TO MY AFTERMARKET POWER DOOR LOCKS UNIT, I INSTALLED THIS PICO TAP W/12 GUAGE WIRE, AND ITS GOOD NOW.
I ASLO HAVE A COBRA CAR ALARM THAT I AM HAVING TROUBLE FOLLOWING INSTALL. INSTRUCTIONS... I WOULD GUESS I CAN CONNECT THE + WIRES UP TO THE FUSE BOX "BATT TAP" TOO? I WILL ASK ABOUT THE ALARM AT A LATER DATE UNLESS SOME ONE CAN HELP NOW
ALL IN ALL, I WANT TO FABRICATE A BRACKET TO MOUNT THE 2- 30 AMP RELAYS FOR THE SEATS, MOUNT THE POWER DOOR LOCK UNIT TO IT AND MOUNT THE CAR ALARM UNIT(SMALL UNIT APPROX. 3" X 3'') AND THEN MOUNT THE BRACKET TO THE ATTACHED BLOCK WHERE YOU SEE THE TOP AND BOTTOM MOUNT HOLES. I AM THINKING THIS IS TOO MUCH CRAP TO MOUNT IN THAT AREA . WHERE DO YOU ALL MOUNT STUFF LIKE THIS ? CURRENTLY I HAVE THE TEMP 30 AMP FUSES AND THE DOOR LOCK UNIT STUCK UNDER THE CARPET BELOW THE FUSE BOX
THANKS FOR ALL THE HELP!
TO THE RIGHT OF THE FLASHER RELAY IS A PINK AND A RED WIRE,BOTH COMING FROM THE "batt" TAP. THESE ARE GOING TO MY CADDY POWER SEATS WITH A 30 AMP FUSE ON EACH(HOOKED UP TEMPORAILY). I NOW HAVE 2- 30 AMP RELAYS WITH A 10 GUAGE WIRE THAT I WANT TO HOOK UP TO THE "BATT" TAP BUT CANT FIND A PICO TAP W/ 10 GUAGE WIRE...ANY SOURCES FOR THIS? THOSE SPADE CONECTORS DONT HOLD UP WELL..KEEPS SLIDEING OUT
TO THE LEFT OF THE FLASHER IS A 12 GUAGE RED WIRE GOING TO MY AFTERMARKET POWER DOOR LOCKS UNIT, I INSTALLED THIS PICO TAP W/12 GUAGE WIRE, AND ITS GOOD NOW.
I ASLO HAVE A COBRA CAR ALARM THAT I AM HAVING TROUBLE FOLLOWING INSTALL. INSTRUCTIONS... I WOULD GUESS I CAN CONNECT THE + WIRES UP TO THE FUSE BOX "BATT TAP" TOO? I WILL ASK ABOUT THE ALARM AT A LATER DATE UNLESS SOME ONE CAN HELP NOW
ALL IN ALL, I WANT TO FABRICATE A BRACKET TO MOUNT THE 2- 30 AMP RELAYS FOR THE SEATS, MOUNT THE POWER DOOR LOCK UNIT TO IT AND MOUNT THE CAR ALARM UNIT(SMALL UNIT APPROX. 3" X 3'') AND THEN MOUNT THE BRACKET TO THE ATTACHED BLOCK WHERE YOU SEE THE TOP AND BOTTOM MOUNT HOLES. I AM THINKING THIS IS TOO MUCH CRAP TO MOUNT IN THAT AREA . WHERE DO YOU ALL MOUNT STUFF LIKE THIS ? CURRENTLY I HAVE THE TEMP 30 AMP FUSES AND THE DOOR LOCK UNIT STUCK UNDER THE CARPET BELOW THE FUSE BOX
THANKS FOR ALL THE HELP!
