3rd brake

premo

Not-quite-so-new-guy
Apr 2, 2008
41
7
8
86 regal....Does anyone know where I can buy a third brake light housing at?
 

81cutlass

Comic Book Super Hero
Feb 16, 2009
4,669
13,656
113
Western MN
What color are you looking for?

I have one sitting in my shelf I pulled out of a car. It's maroon and slightly faded on the top but complete.

AFAIK it's not repopped
 
  • Like
Reactions: 1 users

timo22

G-Body Guru
Sep 10, 2012
563
1,124
93
St. Louis,Mo
Ummmm, I think I have a box of them somewhere. I know there were several different ones. I’ll see if I can find them.

timo22
 
  • Like
Reactions: 3 users

stew86MCSS396

Greasemonkey
Aug 1, 2022
187
258
63
(808)
The light bulb socket tend to melt into crap...just be mindful of that if you're j-yard hunting. Perhaps cooler led upgrade.
 
  • Like
Reactions: 1 user

Sweet_Johnny

Has A Face For Radio
Supporting Member
Oct 4, 2022
831
1,556
93
Wichita, Kansas
Ummmm, I think I have a box of them somewhere. I know there were several different ones. I’ll see if I can find them.

timo22
Damn you, Tim, you're going to get even more of my money now. If there's enough of them to go around I'm interested.
 
  • Like
Reactions: 1 users

69hurstolds

Geezer
Supporting Member
Jan 2, 2006
8,360
18,093
113
I hate those things on a G-body. If the 87 didn't already have the rear window defrogger lines designed to flow around that light, I'd yank that one out.

If someone doesn't find one for you, I think I might have an NOS one in a box somewhere. It's not in my spreadsheets, but I recall stumbling across it somewhere a few months back. If I find it.

Apparently they have LED panel upgrades for these things. I know nothing, see nothing.


Oh, and wiring it up can be a slight issue if you don't have a wiring harness from a 3rd light equipped car. To add it, you're far better off simply finding your brake light switch under the dash. You'll see an orange wire (power in) and a white wire (power to the turn signal switch for tail bulbs). Tap off of that white wire and run a separate one to the 3rd brake light and the other wire to a ground. I think they're blue and black wires on the 3rd brake lamp, but I could be wrong. If you don't and think you can just tap off one of the stoplight side of the tail light bulb wires (yellow RH, green LH), it'll blink every time you put the turn signal in the direction of whichever wire you tapped into. So if you do it, bring it off the brake switch white wire. Now, there is some wiring tricks you may be able to get by with to use both tail wires and not blow fuses with a controller, but that's up to you. I like things simple. Those controller boxes seem like an awful lot of wasted time/money for something running ONE single wire from the brake switch white wire can fix.
 
  • Like
  • Agree
Reactions: 4 users

pagrunt

Geezer
Sep 14, 2014
9,341
15,898
113
Elderton, Pa
Maybe I should throw Jr.'s hat into this ring as the one I plan to put in his car needs a bulb holder/reflector too.
 
  • Like
Reactions: 1 user

oldsofb

Royal Smart Person
Supporting Member
Dec 7, 2007
1,401
4,097
113
Maryland
I hate those things on a G-body. If the 87 didn't already have the rear window defrogger lines designed to flow around that light, I'd yank that one out.
I had to buy a replacement rear window with defog for my 87 442, soooooo.....I accidentally bought a 1985 version. Oops 😁

Hutch
 
  • Like
Reactions: 1 users

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor