Tie rod frame notch

Happy camper · Jul 16, 2024

Has anyone done a frame notch for their tie rods when running air suspension?
I know the s10 guys do it , but it seems if I where to do it the notch would be going into my crossmember. See attached photo.

Clone TIE Pilot · Jul 16, 2024

I would avoid notching the frame whenever possible. Where you are planning to notch is already a stress zone which is a bad spot to weaken. Frame notches create stress risers and decrease beam rigidity. Instead reengineer your linkage to clear your frame.

melloelky · Jul 17, 2024

there's adjustable center links out there to lower the whole assembly.i know Howe makes one and id bet Allstar does too..

Happy camper · Jul 17, 2024

Thank you for the info, ill look into it

-dw- · Jul 17, 2024

This car being built for the frame to scrap pavement? Lowering the inner tierod with out measuring for bumpsteer isnt ideal. It can possibly make it better or worse.

Malibu795 · Jul 17, 2024

I'd see about lowering the tie rod end at the knuckle before notching, it would also reduce how much needs notched if you have to
Especially if you plan on driving it.
Can offset the notch with gussets and want not

Search

Search

Tie rod frame notch

Happy camper

Master Mechanic

Attachments

Clone TIE Pilot

Comic Book Super Hero

melloelky

Comic Book Super Hero

Happy camper

Master Mechanic

-dw-

Greasemonkey

Malibu795

Greasemonkey

Similar threads

Please support GBodyForum Sponsors

Recommended Communities