1980 MALIBU PROJECT
- Thread starter 80/MALIBU/COUPE
- Start date
WENT TO PUT THE CAM IN AND LOOKED AT THE CAM BEARINGS AND SAW LOTS OF COPPER WAS SHOWING
SOO SENT THE MOTOR OFF TO HAVE ALL NEW BEARINGS CAM CRANK ROD AND NEW RINGS GAPPED TO .0030
CLAM SHELLS HAD A IMPRESSION ON THEM KEEPING THEM FROM SITTING FLUSH TO THE ICT BRACKETS
SO I CUT THEM OUT .. FIXED ..
HERE WE GO
NEED TO TRIM THE LFT FRT LWC REAR BUSHING HOUSING , JUST BARLEY ,, TO FIT THE HEADER IN .
SOO SENT THE MOTOR OFF TO HAVE ALL NEW BEARINGS CAM CRANK ROD AND NEW RINGS GAPPED TO .0030
CLAM SHELLS HAD A IMPRESSION ON THEM KEEPING THEM FROM SITTING FLUSH TO THE ICT BRACKETS
SO I CUT THEM OUT .. FIXED ..
HERE WE GO
NEED TO TRIM THE LFT FRT LWC REAR BUSHING HOUSING , JUST BARLEY ,, TO FIT THE HEADER IN .
Last edited:
Got the seats console steering column and dash pulled
Similar threads
