Search results

i have an 87 monte SS with a stock width GN rear end. I have a 15x8" Prostar with a 28/11.50/15 tire

I'm Looking for an 87 Grand National/turbo regal drive train. I have a Rear-end already and do not need one, I need a complete motor(including Turbo), wiring harness, computer, exhaust, intercooler and piping, trans, basically everything i would need to swap my sbc out of my monte ss and put a...

just wondering if anyone knows what the wheelbase from front to back is on the monte carlo's i have an 87 SS. also wondering what the wheel base width, thanks

It must of been a bushing or bearing or whatever keeps the shaft tight inside the distributor because the top of where the rotor sits on was very loose, it moved side to side about 1/4 of an inch so it was letting oil up threw and also destroying the cap at the same time by contacting and...

nah no vacuum line, its not vacuum advance. Electronic i believe

I have a 1992 chevy blazer(fullsize) with 183k miles, it has a 5.7l engine. I am pretty familiar with chevy 350's and i have never run into a problem like this... Oil seems to be leaking into my distributor cap and its killing the contact points on some of the cylinders, causing it to back...

I am running weld prostars, 15x8 with a 3.5bs and a 28/11.5 Mickey thompson ET street tire for the track, no rubbing. for the street I have 275/60 BFG radial T/A also do not rub, unless you have a full tank of gas and 3 people in the backseat

Alright thanks for the advice. Thats what im scared of, i dont want the car being moved on and off the trailer and getting damaged. I was thinking that maybe i could tell them that it cant be driven far or at all, that way they dont move it or take it out for a joyride.

Does anyone know a good car shipping company? My buddy had a car of his shipped from MA to CA and it got there with almost 30 extra miles on. So I am a little nervous about someone joyriding in my car. If anyone has had any experience with a good company or knows a good way to go about this...

I have a MT 15x11.5 slick on my car with the 3.5bs on 8" rim.

I dont know if its the widest, I've heard of people running a 295 rear tire but im not sure what size rim and backspace.

Ya under my photo album or at http://www.cardomain.com/ride/2475929

I dont really know about a 15x10 rim but you would be fine running a 15x8 with 3.5" backspace, while easily fitting a 275/50 or 60 tire, My car is lowered about 1.5" and it all fits perfect no rubbing unless i got two people in the back seat while going over a bump. In the front im running a...

with a 15x8 rim i would go with a 3.5" backspace, leaves you with plently of room for 275's, Im running a weld prostar 15x8 with 3.5"bs and a mickey thompson 28x11.5 fits perfect.

Re: et streets what kind of stall and rear gears and suspension are you running? I havent been able to get to the track but my car should be in the 12.70 range i doubt i will lift the tires tho, I have crappy eibach springs and edelbrock IAS shocks. I have a 3000 stall and 410 gear, hopefully...

Im running a Gforce TH-350 crossmember and a Pypes 2.5" system with X-pipe. The kit is definetly worth the fairly cheap price considering its all stainless and I definetly noticed the performance gain from the Xpipe, also sounds really good when full throttle. the fitment wasnt as good as my...

Re: et streets I know they are not a radial tire but they are DOT, I think people are getting them confused with the now impossible to get Mickey thompson drag radials. anyways i mounted them up and they hook really good, cant wait to try them out at the track.

they will be my only tires for now but im only gunna be driving the car for 1 more month then its off the road. I was just wondering if you HAVE to run a tube in them because the Tech guy at Jegs said that i didnt need to and i have being reading in different forums and a lot people arent...

So have you ever been on the highway at all with them? and are you running tubes in them?

i only drive the car for about 3-4 months a year but i realize they wear quickly. its just a joke running regular radial tires, not much point in havin the power i have if i cant plant it to the ground rite. well thanks for the feedback, appreciate it