Search results

they are in fact leather and also driver is power. I took the pt seats off of the brackets and made some from 1/2 square tube. I then made a 1/2 square tube that mounted to the factory spots and also made 2 new holes. Placed the seats where I wanted them then welded the 2 frames together. As far...

Thank you. The door panel inserts are also that print. I got the car without a headliner board so I had to make my own. The front seats are from a 09 PT cruiser. The center console and shifter is from a 2011 Grand Prix. The engine is an LS 6.0 with a cam and running E85 with a terminator x...

Here are some more pics been crazy around here.

Those were bought from a guy I found on eBay I believe and that color is actually plastidip called vintage gold metallic.

Ok so I have been lurking in the shadows long enough. This is my build over the past 6 or so years. Started life as a Georgia car rust free. Needed a family hauler. I came from a 66 Chevy II post car. 1978 Malibu wagon. Currently it is a 6.0 ls with a 4L80 and 3.42 posi. Not quite done but they...

I have done the swap and my sender and pump unit from and Astro was a bolt up swap

Bought a radiator top plate and item was as described. Great communication and would deal with again. Sent from my iPhone using Tapatalk

The reason I’m asking is I have the blazer spindles for the front and I also have a complete center section for the 9” ready to go already. Sent from my iPhone using Tapatalk

So I was looking at upgrading the 7.5 rear with 2.73 in my wagon. Has anyone used the grand national full floater sold by speedway motors? https://www.speedwaymotors.com/-Grand-National-Rear-End-w-GM-Metric-Brackets,295051.html Looks too good to be true and takes the stock front calipers...

It prints pretty smooth. Normally I print in pla. They don’t hold up to uv but skimmed with filler and painted should be ok. Sent from my iPhone using Tapatalk

I have a couple of 3D printers so if you get the file in.stl format I could print some up for anyone who needs them. Sent from my iPhone using Tapatalk

What seats are those? I have a 78 wagon that I'm putting ls1 in and using Pontiac GP center console and shifter. Need to go to bone yard and get a couple seats for the swap and those look good.