Search results

  1. S

    thm200 or 700r4 87 Cutlass Supreme

    OK I did the search on the site but really didn't answer my questions. The trans in the car with 40,000 is thm200 confirmed by RPO code. So it's a 3 speed. It acts up at low speed when on and off the throttle. I'm not sure what that is all about. I have a 700r4 out of 86 vette, simple...
  2. S

    Shock boots, do I need them?

    I just Bought a set of KYB's for the car(1987 Cutlass Supreme). They showed up and well the fronts don't have boots. I was told when I inquired that I really don't need them. The question is should I buy boots or not? Guess that I'm just not used to seeing them with out something covering the...
  3. S

    Headlight Bezel R&R

    There is actually a black trim paint that is available at just about any auto paint store, comes in a rattle can. It's the same stuff that the OEM used to trim out your car. One can goes a long way. So the little extra $$ you put out for it would be worth it. I've used the same paint in spray...
  4. S

    My First Cutlass comming out of hibernation from the winter.

    I didn't take it that way... I was laughing cause it's probally true. I know several folks that have had great luck with polishing their plastic lens. I just didn't want to try it on the ONLY one I have. But I'm fighting with someone on e-bay for a set to practice on but it's probally going...
  5. S

    My First Cutlass comming out of hibernation from the winter.

    LOL Anal Huh? I guess I am... Not really you should see my 68 chevy pickup as a daily driver...LOL Actually, I guess that it's just years of working with Dad and his show cars, perfection was always a must. In addition I've bought and sold well over a dozen Monte Carlo's over the years and...
  6. S

    My First Cutlass comming out of hibernation from the winter.

    It's the little things The car is exceptional, however there are little things that I just can't understand why the PO didn't address that would make it even better. Here is the Drivers sider tail light, besides the emblem the lens is crazed and scratched, the passengers side is perfect it...
  7. S

    My First Cutlass comming out of hibernation from the winter.

    Thanks.. Pic's UP! ok that is a much easier way to post pictures than what it used to be. thanks for the advice. Enjoy the pictures..
  8. S

    My First Cutlass comming out of hibernation from the winter.

    ok trying again... Ok Cross your fingers that this works....
  9. S

    My First Cutlass comming out of hibernation from the winter.

    OK I give.. Can't post no matter what I try, read the thread about how to post. Tried removing things and nothing works.. So I guess view my Photo album...
  10. S

    My First Cutlass comming out of hibernation from the winter.

    1987 Olds Cutlass Supreme 40,545 original miles, shes not perfect but shes pretty good... hope that I can get the pic's posted. http://gbodyforum/album-image-img_1026.jpg http://gbodyforum/album-image-img_1023.jpg http://gbodyforum/album-image-img_1022.jpg...
  11. S

    Engine running rough.... help!

    Suggestion Although you probally did in fact find the problem. Before you put the new fan on it and head out on the next road trip. Make sure that you didn't bust a motor mount causing the engine to roll in the motor compartment and cause the fan to contact the shroud and that is the cause of...
  12. S

    no start - help with diagnosis

    RE: YES I am and IDIOT! NEVER AND I MEAN NEVER answer a post within moments of waking up! You are Correct in assuming that the engine would turn over. Guess it would be a real bugger at stop lights if as the engine turned and the transmission wanted to keep the rear wheels turning. What I was...
  13. S

    How to remove swirls from black paint

    re: No problem, I'm kinda the new guy here and I hate to see a post go with no answers. I never realized it was that old. Glad that you got it worked out though... Have a great Holiday!!!!
  14. S

    glass removal

    window r/r I have heard that the windows for a vinyl top and non vinyl are different. I'm not completely sure but recal reading it once. Just thought i'd thow it in here. A piece of piano wire will help you, push it through the seal and you can use it to cut your seal and lift the window out...
  15. S

    Best security methods?

    Some interesting ideas here.... I only saw it here once, as much as we would all hope that our prized vehicles would remain with us until we elect to sell them to another worthy owner. Insure the car properly, most if not all of these cars are classics. Hagerty insurance is probally one of...
  16. S

    How to remove swirls from black paint

    re: Mike, I have not used the Meguires product, there are however several methods to remove swirl marks. What ever you use remember that you don't need alot of product to do the job. All you need is enough to cloud the paint. Make sure that you start your repair with a clean/new pad if...
  17. S

    no start - help with diagnosis

    Harmonic balancer bolt Dr, I'm going to assume a couple of things, First if it's an automatic and you still have the Flexplate connected to the trans and the trans is still in the car. If it's in park it shouldn't roll over when you try and remove the Harmonic balalncer bolt. Same with a...
  18. S

    87-88 Cutlass Supreme Headlight covers?

    Thanks, but those won't work on the Euro lights. I've searched around and believe that I have found a set here in the States. If Not I have definately foud a set in Hawaii..lol
  19. S

    Hello from Southern Mississippi

    RE: From one new guy to another welcome aboard...Enjoy..
  20. S

    Manual Buckets?

    1987 Cutlass, Manual Buckets. On the drivers side seat, the bolt that the back latches onto. On the Drivers side there is heavy plastic covering the bolt/pin. It is completely different than the passengers side. On the passengers side seat the bolt/pin the the seat back latches against...

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor