transmission swap

Good morning everyone! My 1987 Monte has been in the family since 92. We bought it with 56k miles on it. It still had the fully original drivetrain until I bought it from my dad. It had a 4.3 v6 fuel injected with a th200C 3 speed transmission. (MV9 code) I swapped the engine to a v8 carbureted...

Okay so I own a 1978 Pontiac Grand Prix and it’s a roller. Car was originally a V6 with a th200 or whatever came with the V6. I have a chevy 350 and also a th350 that I’m going to throw into the car, and I was wondering how much modification it will take to install the th350? Can I use the stock...

I just wanted to make sure about this. I have a 1980 el camino with a th350, would I just be able to swap in a 200r4 without changing the crossmember or anything? thanks

Hey all, To all who have the experience with doing a beefier transmission swap.. I'm swapping a big block in my '85 elco and along with it a new transmission. From the stock th350 to a th400. My question is will the stock crossmember suffice or am I gonna have to scrap it and have another installed? Thanks!

Hey guys I know I haven't posted at all since I joined but I can't work on my car when I'm at school. Either way, I've been trying to solve a no-shift problem with my LT1 swapped Cutlass, not your typical G-Body issue but here goes. Background on car: 1986 Olds Cutlass Supreme w/ 1996 Caprice...

. The reverse on my cutlass went out recently, I had a th350 laying around so I decided to swap the transmissions. I've already bought the BOP Adapter, block bolts and torque converter bolts . But I don't know what to do next. To swap my transmission would I have to remove the engine and transmission...