350 sbc issue

Status
Not open for further replies.

78k10revival

Not-quite-so-new-guy
Feb 21, 2016
5
0
1
38
Hey guys. I know this is a good forum but I need help with a 350sbc. I have a 1978 k10 4x4. Truck ran this morning. I changed the spark plugs this afternoon and now won't fire. Have fuel and spark. But it seems like the spark is kinda intermittent. What could my issue be. Thanks in advance
 
did you take the wires out or just remove them from the plugs....did you use the right plugs and did you gap them correctly
 
Just pulled them off the plugs. Replaced them with the exact plugs that were in it and I gapped them at .45
 
The spark isn't blue. It's orange and not real constant. I was thinking maybe the module is going bad on the hei
 
sometimes everything works ok until you disturb it. I would check the wires before I started changing parts.
 
Are you sure you put the plug wires back on correctly?
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor