Accessory Drive GM 19257325

[Kwikr1]

Hello .. first post . In the middle of building a forged LQ9 ( maybe going Blow Through) and looking for a accessory drive that will work . Any ideas on the GM #19257325 ? Not worried about AC . Thanks !

 

[L92 OLDS]

Hello .. first post . In the middle of building a forged LQ9 ( maybe going Blow Through) and looking for a accessory drive that will work . Any ideas on the GM #19257325 ? Not worried about AC . Thanks !

What's it going in and does it have to be low profile? You can buy truck accessories in the salvage yards cheap. Being an LQ9 you already have the truck set up?

 

[Kwikr1]

Going in a “87 Buick Regal .

 

[Texas82GP]

The Corvette accessory drive will fit the chassis nicely. We used it on my brother's 78 Z28 LS swap. That being said, ICT Billet makes some nice brackets to repackage the truck accessories. Credit to Scott (injectedcutty) on this...
https://www.ictbillet.com/ls/brackets.html
Here is a pic of the Corvette setup in my brother's car. We used the Holley bracket for the compressor (I realize you said you weren't concerned with A/C)....

 

[Kwikr1]

The Corvette accessory drive will fit the chassis nicely. We used it on my brother's 78 Z28 LS swap. That being said, ICT Billet makes some nice brackets to repackage the truck accessories. Credit to Scott (injectedcutty) on this...
https://www.ictbillet.com/ls/brackets.html
Here is a pic of the Corvette setup in my brother's car. We used the Holley bracket for the compressor (I realize you said you weren't concerned with A/C)....
View attachment 100930

Very nice .

 

[L92 OLDS]

The Corvette accessory drive will fit the chassis nicely. We used it on my brother's 78 Z28 LS swap. That being said, ICT Billet makes some nice brackets to repackage the truck accessories. Credit to Scott (injectedcutty) on this...
Here is a pic of the Corvette setup in my brother's car. We used the Holley bracket for the compressor (I realize you said you weren't concerned with A/C)....

Very well done!

 

[L92 OLDS]

Going in a “87 Buick Regal .

The Corvette set up definitely looks better with a lower alternator location and would be my first choice but truck accessories will fit and are cheap. Another plus for the truck set up is that the power steering pump lines connect to G body hoses without modification. You can add the Holley AC bracket to keep your AC compressor in the factory location.

https://www.summitracing.com/parts/...HM-8B-6s0hNjlqX9z2iujjh82mQnW4dhoCHXsQAvD_BwE