Fellas, ladies..what's happening?!!. I hope everyone's coolin' and ready for a chill weekend. The other day my partner Mathmatic posted a thread on installing the gauges. There was some good helpful info from those who responded, but I have a few questions along with some pics I've snapped of what I think are temp sensors on my Olds 307 to see if you guys could give me a hand. I'm planning to pick up a Auto Meter 3-gauge cluster (oil press., water temp, voltage) on the way home and get started maybe tonite. I recently changed my heater core, radiator and thermostat and want to be able to know the car's running the way it should, so I figured I'd get these gauges kragenoff..
I read the instructions youngdeezy left on Mathematic's thread but first..
1. where is the ignition where the voltage line is wired to? Can you post a pic?
2. Is this the water temp sensor?
3. These are both to the right of the water neck..one on left has a green wire going to it..the one on right has a yellow & black wire going to it.
4. Where is the oil pressure sensor/send on the 307? Can someone possibly post a pic of what I'll be looking for?
I read the instructions youngdeezy left on Mathematic's thread but first..
1. where is the ignition where the voltage line is wired to? Can you post a pic?
2. Is this the water temp sensor?
3. These are both to the right of the water neck..one on left has a green wire going to it..the one on right has a yellow & black wire going to it.
4. Where is the oil pressure sensor/send on the 307? Can someone possibly post a pic of what I'll be looking for?
