Anyone mount a floor shifter w/bench seat?

[OneLuv1979]

Im wanting to add a Hurst V Matic Floor Shifter but curious if anyone has done this with a G Body Bench 40/60?
Will it fit and function? Figure i should ask before i cut a hole ...
Pictures and feedback would be great!

 

[Lowproelco]

check this thread out http://gbodyforum.com/viewtopic.php?f=7&t=33013

 

[OneLuv1979]

Thanks but i was hoping for some more photos , guess its hard to do ?

Im looking at the b&m pro stick as of now as its a small design and might just fit

 

[mebe007]

Just do a search. There's someone around here with a red bench running something like w megashifter. I remember seeing it just can't remember who

 

[OneLuv1979]

Thanks i will do that .... Really want to find something and see how it works moved forward , curious to know how hard it is to shift when making a pass ...

 

[1984 Regal 327]

I have a b&m pro ratchet in my 84 i have no problems shifting

 

[RITTER]

CHRIS.O had a B&M ratchet shifter setup in his Cutlass and it was only about an inch away from the radio delete plate, that we had made, when it was in park. Granted, it wasn't much of a problem with that because he didn't have a radio, but if you had a radio it could pose to be a problem :idea:

I am planning on having my center seat section cut back to be flush with the fold down arm rest to accommodate a center console/shifter setup

 

[OneLuv1979]

CHRIS.O had a B&M ratchet shifter setup in his Cutlass and it was only about an inch away from the radio delete plate, that we had made, when it was in park. Granted, it wasn't much of a problem with that because he didn't have a radio, but if you had a radio it could pose to be a problem :idea:

I am planning on having my center seat section cut back to be flush with the fold down arm rest to accommodate a center console/shifter setup

I dont understand how thats possible the ratchet shifter always stays in one place .... It dont go forward where it could touch the radio , its my understanding that it stays in one spot.

 

[PUN]

Not exactly what you are looking for but here is a B&M Ratchet shifter mounted with bench seats...may give you some ideas:

Build link:
http://www.horsepowerjunkies.com/forums ... p?t=118293

 

[olds307 and 403]

This is a Hurst shifter meant for a TH 400, modified it for a TH 250C. I still need the boot but you get the idea. The gate is a unique set up and uses an adjustable rod instead of a cable.