Brembo/Blazer Spindle Conversion

[ostrich]

any pics with the wheels on? i want to do this swap so bad ..

Here's a couple of pics. The wheels are 18x8x4.5BS, tire 245/45/18. The tires are still within the fender flare. I was worried they would stick out, but not at all. I'm pretty ok with the look etc. Still working on the ride height stance. There is about 3/16" between the wheel & the caliper with the spacers.

 

[TType85]

Looks good! 3/16 is fine. 3mm is the minimum Brembo says and you are close to 5mm.