I'm sure this has been asked a million times over, but I can't find it. So here goes.
Putting together an Olds 1975 355 running at about 9.1:1. Got 72 7a heads that were freshly rebuilt when I bought them. Seriously considering the stock 262/274 #402486 olds grind from supercarsunlimited.com. Just wondering if there are other options I should be considering. This is going in an otherwise stock 87 cutlass with a 200r4 and a GN rear with 3.42 gears. This will be a daily driver. I know I'm limiting myself by not wanting to change the springs in the heads, but they were just redone and that was pretty much why I bought them.
Thanks in advance.
Putting together an Olds 1975 355 running at about 9.1:1. Got 72 7a heads that were freshly rebuilt when I bought them. Seriously considering the stock 262/274 #402486 olds grind from supercarsunlimited.com. Just wondering if there are other options I should be considering. This is going in an otherwise stock 87 cutlass with a 200r4 and a GN rear with 3.42 gears. This will be a daily driver. I know I'm limiting myself by not wanting to change the springs in the heads, but they were just redone and that was pretty much why I bought them.
Thanks in advance.
