Carb help

[87cutty]

Wanting to buy 1050cfm dominator but i keep hearing about these "progressive secondaries". What does this mean? I have heard of vaccum and mechanical any help would be appriciated

 

[pontiacgp]

http://www.dragracermag.com/carburetor-class-the-hows-and-whys-of-secondaries

 

[87cutty]

http://www.dragracermag.com/carburetor-class-the-hows-and-whys-of-secondaries

There is nothing here about progressive just vaccum

 

[87cutty]

http://www.dragracermag.com/carburetor-class-the-hows-and-whys-of-secondaries

Ahh ic it now my bad

 

[pontiacgp]

Ahh ic it now my bad

reading is a lost art....🙂

what's your engine to need a 1050?

 

[87cutty]

reading is a lost art....🙂

what's your engine to need a 1050?

Yea my bad lol i have an 87 cutlass with 454 possibly 468 when i tear it down to look at cylinder walls.

 

[87cutty]

reading is a lost art....🙂

what's your engine to need a 1050?

I love the look of a 1050. Also i want to build a motor where if i want more hp. I dont need to start over

 

[pontiacgp]

you can take a cheap usb borescope camera to look at the pistons. Some are marked on the piston face and that will tell you what the engine is.

 

[87cutty]

you can take a cheap usb borescope camera to look at the pistons. Some are marked on the piston face and that will tell you what the engine is.

Its a 454. I mean if the cylinder walls are not the greatest i will bore to 468