control arms

[lightemup2]

hey guys i bought some control arms from speed way motors and i put one on and i feel like there is no play in the arms like its not long enough and the balljoint is to cocked to one angle, i dont know if its because the motors out or what but here arew some pics tell me what you guys think

 

[pontiacgp]

you have that control arm on the wrong side

 

[Lowproelco]

Mine looks the same way bro... but I don't have the front clip or the engine either... so about 800 pounds so it will level out some... you can also buy some longer ball joints if you still don't likw the way it sits...

 

[Lowproelco]

So gp does he have it on backwards so the long part of the shaft goes in front...

 

[pontiacgp]

yes..the long side is on the front side..

here from jegs this is a left side upper...

Upper Control Arm
All G-Bodies
Left side
827-94331

 

[lightemup2]

I bought 2 rights, because the left is longer then the right for circle track racing, I was told to order 2 rights and flip one over,

 

[Lowproelco]

No your right... you need two rights.. but what he is sayin is that you have it on backwards. Long part of the shaft up front and shorter shaft in the back... flip it over and it will be right.... also flipping over the ball joint...

 

[lightemup2]

Oh Ok got ya! I'll flip it over, thanks guys!