custom all ateel fender vent

[jlcustomz]

Mostly completed this on an old fender I will be splicing to my damaged custom fender. Cut out the face area & made a new section with the angle bends in it. Bent a soft corner in it & welded to face of fender. then made a 1/8" x 1/8" corner for the front area. made a sample grille.
Tacked with mig while holding by hand & finished off welds with tig.
Inspired by Ferarri 599gtb vents.

 

[pontiacgp]

That is a really nice job you've done and super nice invisible welding on the sheet metal...🙂

 

[Donutboy97]

That's pretty cool

 

[clean8485]

Very nice!