Cutlass console repair

[Cutlass1010]

Is there anyway to repair the glove box area without buying a new cutlass console looks to me there is no way but I could be wrong

 

[buick7332]

Is there anyway to repair the glove box area without buying a new cutlass console looks to me there is no way but I could be wrong

I had a similar issue with my console. I used lock tite plastic epoxy and fiberglass mat. Use duct tape as a backer , drill small holes around the area your filling in. (This will give the patch something to hold on to) cut fiberglass to fit and drench it with epoxy. Use a popsicle stick to work with. Don't try to fill the area with 1 shot. Let it dry and add a 2nd and then a 3rd layer. Take your time and be sure to mask off the area. You can smooth it with a fine file and paint with plastic model paint. Good luck

 

[1bad79]

I concur fiber glass epoxy^^^^^^^^ just remember its already broke so you cant make it worse that's always my logic so don't be afraid to try some stuff that's out of the box

 

[Cutlass1010]

Thanks for the info but the car I'm building I spent some bucks to bring it back from the dead so I really want to keep it fresh so if I can't repair I guess I would have to replace

 

[L.A.X-RATED]

Send me that console (with return shipping)and a c-note and I will have that console better than new for you