Dipstick tube

[87cuttdawg]

How do I remove dipstick tube?

 

[bob64]

Wiggle front to back while pulling on it. If your not using it again crush it as close to block as possible.

There just installed with a flared ring on them an some sealant. Some are just push in with a slight taper to them.

 

[airboatgreg]

The dipstick tube pulls out but you have to see if you can turn it a bit first, spray carb cleaner, twist and work in and out to remove it. Will ruin your day if you break it. I agree with bob64 on re-install

 

[87cuttdawg]

The dipstick tube pulls out but you have to see if you can turn it a bit first, spray carb cleaner, twist and work in and out to remove it. Will ruin your day if you break it. I agree with bob64 on re-install

I think it's bent anyway my dipstick won't go back in so I'm probably just gonna break it and get a new one

 

[pontiacgp]

it should be secured near the top with a bolt through the tab into the head. It's a 10 mm head on the bolt.

 

[michmalibuman]

Use care if you break it off that will not be good.