Door swap

[Blew86442]

Bear with me guys....I'm starting to swap the door on my cutlass. The new door has the hinges intact. How do I go about this project, do wires unplug somewhere routing into the car? Its a full power door. Do I have to remove the hinge pins or can I unbolt and bolt the new door with the hinges on? Thanks in advance! All guidance is appreciated!

 

[Grandprixpaul]

Change the pins in the hinges now easy while there out ,id pull the harness into the car through the black boot and the old hinges should bolt on ,hope you have some help keeping the door alighned dont cross thread the bolts.

 

[Blew86442]

Re: Door swap Pt 2

Thanks so far.....I have the door off, but how do I get the passenger mirror off from the cable of the mirror??? If that makes any sense.

 

[cutlassboy88]

post some pics

 

[Mike P]

The mirror does not comeoff the cable. You need to disconnect the end with the control knob from the dash and pull cable, knob and all into the door. Then you remove the nuts holding the mirror to door and remove the whole unit.

 

[Blew86442]

Thank you,out to the garage i go to conquer this project.