CUTLASS Dye Color Needed- 1979 Cutlass

[Bonnewagon]

My 1983 Pontiac Bonnewagon interior was a nice color called Regal Blue. SEM had discontinued it but I searched and searched the interwebs for weeks. I eventually came across an auto body shop supply house in Ohio and they had a case lot of the Regal Blue aerosol cans. I bought the whole case on the spot. I still have most of them after re-doing all the major interior panels , dash, and console.

 

[BlueCalais79]

Thanks all, I'll be taking these parts to a body shop I've been advised of will do the work as I don't have the parts & smarts to dye mix.

 

[mikester]

Thanks all, I'll be taking these parts to a body shop I've been advised of will do the work as I don't have the parts & smarts to dye mix.

Theres no mix. SEM Color Coat goes into a spray gun with no thinner, hardener or reducers. Pour it in right from the can after you stir it. Put a coat of adhesion promoter on after cleaning the pieces and spray on the color a few minutes later. Its dry in a matter of minutes. Like old school lacquer. VERY simple to use. Why pay someone to do it for you unless you dont have a compressor. Just sayin...

 

[QS442]

I sprayed the lower door panels, A pillars and the horn button in the SEM saddle tan in this 1979 back in 2021. Good match for me.

I have some left in a can if you want to test it out. The can is yours for the price of shipping.

 

[88hurstolds]

Dye codes are on www.gbodyolds.com