Eibach help

[TURNA]

QA1 coilovers

readjust the coil overs to match the rears

 

[88MONTESS]

how many coats of paint did Macco put on your car?

It’s single stage urethane. Not really sure about how many times they went over it.

 

[88MONTESS]

readjust the coil overs to match the rears

I considered that but I really don’t want the car that low.

 

[TURNA]

once you adjust it to the new springs it should level itself

front spring will control how the rear sits

 

[pontiacgp]

another thing I found the eibachs is they way too expensive

 

[500/600]

Black GNX wheels and a small spacer on the rear would be just right.

 

[fleming442]

another thing I found the eibachs is they way too expensive

For a "performance" spring, the set of 4 is reasonably priced at ~$250USD because 4 "replacement" springs (albeit from an IROC or S-10) are $80-90 through rockauto plus shipping.
It's a wash.

pontiacgp, what's that part number for the rears, again.

 

[pontiacgp]

part number of the spring????

 

[fleming442]

part number of the spring????

Yeah. Don't you have F-body convertible springs out back?
Those, and the F-body isolators work well?

 

[pontiacgp]

Yeah. Don't you have F-body convertible springs out back?
Those, and the F-body isolators work well?

no I have A body now (5413) and I had Citation/Phoenix springs (5659) before that with the F body isolators that have the channel for an open spring.