F'ed using ebay (front rearward lower control arm bushings)

[L05edSS]

Probably someone sent back a different part in the box and you got it. Would see if looking up a picture of the part number and see which one matches it

i could see that if was 1 but at time of order there were 18 in stock but to get 2 like that? also i sent a snap shot of same item from amazon that i should of got and lookin back at the ebay page they had correct item pictured. also their rating was 98.9%

 

[Ernest]

Figure since OEM stuff is getting harder to find... ever think about going with a reputable aftermarket place that offer polyeurothane/graphite instead of the plain rubber that should be more of a tailored fit than guessing with the original stuff?

 

[gnvair]

The Moog stuff gets you the OEM Harris bushings.

 

[L05edSS]

Figure since OEM stuff is getting harder to find... ever think about going with a reputable aftermarket place that offer polyeurothane/graphite instead of the plain rubber that should be more of a tailored fit than guessing with the original stuff?

i was actually thinking that before i really looked into it that buting refurbed mikes montes bucket seats caused. now i cannot do my own work (addressed this is previos posts) and not gonna repeat cuz it sucks the oxygen out of the room. i need to keep stuff as low maintenance as possible, i want the suspension to operate as engineers designed it to do & don't have high hp as a cruiser/ groc getter.

the thing that killed it was seeing each bushing have a grease fitting followed by multiple accounts of bindings and noises aside from prices. otherwise you're not wrong with that advice.

 

[L05edSS]

The Moog stuff gets you the OEM Harris bushings.

harris bushings? can you explain, never heard.

 

[gnvair]

harris bushings? can you explain, never heard.

Harris was on the original control arm bushings.

 

[gnvair]

These are the Moog numbers
K6177 for the lowers
K6176 for the uppers

 

[L05edSS]

UPDATE! i put on order 2 45G9044 from amazon with a delivery date that stretches into early june..... GTFO! they're in stock so why the delay? ordered over a wk ago hopin i was bein joshed, nope they serious. i ordered tonight from carid hoping can get a overnight option even if cost $70 or whatever for a $40 order. NOPE! ground only. so im keepin that amazon order goin as well and if wind up with 2 sets the extra set gonna live under my pollow and any F'er that comes to steal is gonna get stabbed in the neck.

shouldn't be this hard to get a part if not discontinued or is it bout to be?

 

[Ugly1]

UPDATE! i put on order 2 45G9044 from amazon with a delivery date that stretches into early june..... GTFO! they're in stock so why the delay? ordered over a wk ago hopin i was bein joshed, nope they serious. i ordered tonight from carid hoping can get a overnight option even if cost $70 or whatever for a $40 order. NOPE! ground only. so im keepin that amazon order goin as well and if wind up with 2 sets the extra set gonna live under my pollow and any F'er that comes to steal is gonna get stabbed in the neck.

shouldn't be this hard to get a part if not discontinued or is it bout to be?

Stuck on the boat waiting to get in at Baltimore?😖

 

[gnvair]

Ill sell you the Moog ones I have. One box has both bushings. The other is missing the skinny front bushing.