Has anybody put in a aftermarket floor shifter with the split bench seats? If so can I see pics? What brand do you guys recommend?
Floor shifter with split bench seats pics?
- Thread starter 84cutlass383
- Start date
- Status
I used both a B&M Z Gate and a B&M Megashifter in my Monte when it had the split bench seats. I dont have any pics but it wasnt really comfortable and everytime I put them in park I had to be very carefull not to punch the stereo out. I broke the volume knob in a brand new Kenwood by putting it in park :lol:
84cutlass383 said:
Here you go,i am using the B&M Megashifter 4 speed ,i installed it were people could still sit in the back seat,keep in mind if you want to install one .i had to unbolt my exhaust from the headers,get them out of the way,The cross member will have to be taken out,speedometer cable unscrewed,an the trans tilted down,so you can get your hand up in there to get the nuts on/off the bolts,I also took my distributor cap off so it wouldn't hit the firewall a break but i did notice it's not that close cause i still have a block of wood an a jack under it
Attachments
- Status
Similar threads
