Guys, I never did figure the issue out and I checked all suggestions so I pulled the engine and replaced a piston and reringed the first 350 that I dropped in. I have been researching cam options with using a TBI head. I know options are limited especially with the heads being stock but I ended up going with a Howards cam and lifters kit. My buddy wanted a lopey idle so I think I gave him a middle of the road cam that has a good idle. The stall should be in on Tuesday for it and I should have it all back together in a week and a half or so. I'll post up a vid or 2 when its done.
Thanks again for the help.
Thanks again for the help.