So I just got my motor back from the shop and the ball is rolling on getting this thing back on the road. I figured it'd be fun to try to guess what power this motor will make! Once it's in the car and running I'll be taking it to a chassis dyno so I'll share the exact numbers once I have them.
Specs:
SBC 355 (hydraulic roller), roughly 9.7-1 compression w/ forged rotating assembly
AFR Eliminator 195 heads
Custom comp cam .602/.608 lift, 235/243 duration, 110 lsa
Holley 750 double pumper
Edelbrock rpm air gap intake
For those wondering, it's going in a 1985 Monte Carlo with a built 200-4r trans, 3200ish stall, 3.73 gears (for now - I will need to do track testing with 28s to see if I need to up the gear ratio)
Specs:
SBC 355 (hydraulic roller), roughly 9.7-1 compression w/ forged rotating assembly
AFR Eliminator 195 heads
Custom comp cam .602/.608 lift, 235/243 duration, 110 lsa
Holley 750 double pumper
Edelbrock rpm air gap intake
For those wondering, it's going in a 1985 Monte Carlo with a built 200-4r trans, 3200ish stall, 3.73 gears (for now - I will need to do track testing with 28s to see if I need to up the gear ratio)