length of the inside of body

[mebe007]

anyone try this stuff? http://www.summitracing.com/parts/TRU-BLIP12406/ not a bad price for the size you get. i have plenty of spray adhesive

looks like its made by these guys its just double sided with foil
http://www.bondedlogic.com/construction ... nt-barrier

http://www.jcwhitney.com/heat/sound-ins ... 0475.jcwx#
good reviews on it over at jcwhitney. now just to figure out if i want to do just the floors or everything

i believe 2 rolls will be enough to do the entire floor and under the headliner.

 

[565bbchevy]

The Thermo-Tec I used was relatively inexpensive, I don't know the specific name for it I just remember it being about 1/2" thick with aluminum on just the one side and you had to spray glue it down except on the doors where I just used the factory style plastic push pins. I would imagine any brand that is comparable is going to be a decent improvement.

 

[mebe007]

The Thermo-Tec I used was relatively inexpensive, I don't know the specific name for it I just remember it being about 1/2" thick with aluminum on just the one side and you had to spray glue it down except on the doors where I just used the factory style plastic push pins. I would imagine any brand that is comparable is going to be a decent improvement.

gotcha lol. im stuck on whether or not to even do it lol. if i could sell my demon carb i would do it without thinking twice but funds are tight ans still trying to get it running lol

 

[pontiacgp]

remember the factory carpet has a nice layer of insulation material under it and that covers up to the front of the back seat..

 

[mebe007]

yeah when i ordered the replacement carpet from mikemontes i made sure to get the mass backed carpet. itll be here soon enough though.