New to forum looking for info

[mclellan83]

Are you doing the same?


Sent from my iPhone using Tapatalk

Yes sir, just waiting to drop my calipers off at the powder coater since they came slightly damaged from shipping. I'm hoping my wheel and caliper combo looks as good as yours. I think I'm heading in the right direction

 

[Geezy24]

Yes sir, just waiting to drop my calipers off at the powder coater since they came slightly damaged from shipping. I'm hoping my wheel and caliper combo looks as good as yours. I think I'm heading in the right direction

View attachment 87950

Im sure it will! I just kept it simple black and yellow
What color are going with on the calipers?



Sent from my iPhone using Tapatalk

 

[84slow]

Dude it's to nice. Everything about that car. Welcome and can we be friends please

 

[mclellan83]

Im sure it will! I just kept it simple black and yellow
What color are going with on the calipers?



Sent from my iPhone using Tapatalk

Black and yellow would work very well here in Pittsburgh. I am going to do the opposite of the wheel, gunmetal caliper with the turquoise lettering. If I was going to do the caliper originally I would have left the spokes of the wheel gunmetal and the turquoise barrel so that I could make the calipers turquoise. But of course things never go as planned

 

[Geezy24]

Black and yellow would work very well here in Pittsburgh. I am going to do the opposite of the wheel, gunmetal caliper with the turquoise lettering. If I was going to do the caliper originally I would have left the spokes of the wheel gunmetal and the turquoise barrel so that I could make the calipers turquoise. But of course things never go as planned

Post up when complete... Im sure it will look great! I just did yellow because red is overdone in my opinion.



Sent from my iPhone using Tapatalk

 

[Geezy24]

Post up when complete... Im sure it will look great! I just did yellow because red is overdone in my opinion.



Sent from my iPhone using Tapatalk

So my C6 Z06 front and rear brake conversion is complete. Changed the offset since I no longer have that grease nose for the feont rotors so I was able to go from a 1.5 inch lip to a 3 for my front wheels. Here are some picture

Sent from my iPhone using Tapatalk

 

[Geezy24]

So my C6 Z06 front and rear brake conversion is complete. Changed the offset since I no longer have that grease nose for the feont rotors so I was able to go from a 1.5 inch lip to a 3 for my front wheels. Here are some picture

Sent from my iPhone using Tapatalk

Conversion z06 c6 6 piston front 14” and 4 piston rear 13” wilwood Mc kore 3 brackets ac delco professional rotors front and back, hawk pads/ wilwood adjustable prop valve steel braided kore 3 brake hoses ac delco pad front pads( big mistake!!!! Should have gone with hawk! Major brake dust!!!) zq8 2wd drive blazer spindles, new ac delco sealed hubs
Also, installed a Buick rear end cover, serviced the posi, GN1 intercooler shroud , rear metco upper and lower control arms and installed upper spohn A arms and spohn bumpsteer kit some time this week.

Sent from my iPhone using Tapatalk

 

[mclellan83]

Looks amazing man

 

[nickygn23]

Purdy

 

[BOXCARS]

Hey Geezy -- we spoke before on TB.com before I got banned about 14" corvette brakes on our GNs while you were waiting to get your brakes together. Good job. Looks great!