nine inch rear problems

[munnster racing]

i just bought a nine inch rear from srapker racing it is a direct bolt in. i have lakewood adjustable upper control arms. they are hitting the top ears on the rear. please help

 

[timmyadkins]

i just bought a nine inch rear from srapker racing it is a direct bolt in. i have lakewood adjustable upper control arms. they are hitting the top ears on the rear. please help

What do you mean they are hitting the top ears in the rear end? Like the bushing mounts? Or the differential housing? Jack you ride up and let your rear end hang. Adjust your uppers to fit shouldn't have a problem. If it don't line up them send it back. But if it's hitting the actual rear end body then maybe your pinion angle is wrong. I set my pinion pointing down three degrees. Hope this helps. If not tell me more about your problem.

 

[munnster racing]

they are hitting the bushing mount on the front.

 

[TURNA]

Do u have the left on the right and the right on the left side?

 

[dustin72]

My Trick Chassis UCA's hit my Moser 9" bushing ears as well. I just notched the ears a bit for clearance and now they're fine.

 

[565bbchevy]

i have lakewood adjustable upper control arms. they are hitting the top ears on the rear.

Do you have a part number for the Gbody upper adjustable control arms? I have never seen a Lakewood version for Gbody only Abody to 72' and even those people had issues with them hitting the ears on the rear end.

 

[munnster racing]

i dont have the part number. i bought the trick chassis upper and lower adjustable ones and they hit a little bit i am going to notch the ear a little bit. thanks for all your guys help.