Radiator Hose

[84cutspreme]

Ok, upgraded my radiator to a 3-core. I have a small problem in that the monte carlo upper radiator hose is now too small. I have a small block Chevy. 21204 is the gates number for the stock hose. Problem is the upper hose now needs to be 1-1/2" instead of the 1-1/4" hose end. Has anyone ever run into this problem? I know the Be Cool radiators are setup the same. Just looking for a molded hose that fits g-bodies with stock 1-1/2" thermostat housing and the 1-1/2" radiator inlet. Flex hose is a last resort.

 

[RITTER]

I will look when I get to work tomorrow and get you a part number :wink:

 

[84cutspreme]

Okay Thank you very much

 

[RITTER]

You will need NAPA #7575 NBH

The Gates #20827

:wink:

 

[84cutspreme]

tyvm, will that work with stock thermostat housing that runs toward driver side, or do I need to get a thermostat housing that goes out toward center?

 

[84cutspreme]

Thank you very much, worked perfect!! 😀

 

[RITTER]

Always looking for opportunities to expand my parts knowledge 8)